Active Torque 250W Kit

Motor

Power	250W
Voltage	36v
Maximum torque	80Nm
Limited speed	25 km/h
Full speed	45 km/h
Weight	3.6 kg
Assistance levels	4 (eco, tour, speed, turbo)
Crown	42 teeth
Display	LCD with USB port
Accessories	Chainrings from 26 to 52 teeth, engine guard

Active Torque 250 W motor approved for Italian legislation
(maximum power 250 W and limitation 25 Km/h)

On private routes, the maximum speed limit can be unlocked and it is even possible to exceed 45 km/h depending on the transmission ratio used.

The engine mounts crowns with a standard 5-hole pitch with a 110 mm bolt circle, this allows the user to easily replace the crown, the engine can mount a ratio from a minimum of 34 teeth up to a maximum of 52 teeth. In the particular case of installation on a bike for facing steep climbs, it is possible to mount a 26-tooth chainring.

Thanks to the latest generation torque technology, the motor works intelligently following the user's pedalling, the pressure sensor modulates the force applied to the pedal and multiplies it at the transmission output with variable intensity based on the level of assistance selected.

The motor is easy to install, it does not need brake levers with motor detachment sensor as the torque system interrupts the assistance simply by not pressing the pedal, allowing for an optimal feeling with the user.

Bag battery

Model	11.6	15
Capacity	11.6 Ah	15 ha
Voltage	36v	36v
Weight	3.4 Kg	3.4 Kg
Electronics	Smart BMS	Smart BMS
Technology	li-on	li-on
Cells	Samsung SDI	panasonic
Number of cells	40	40

Compact battery suitable for city bike or MTB frames with quick release system and fastening to the frame with Velcro and quick plug for connection to the motor. Bag made of waterproof technical fabric with protective shell. The charging cable is inserted inside the bag and protected by a zip. Thanks to its compactness and low weight ( only 3.4 kg ) this battery is easily transportable. Battery charger included from 3 A to 36 V with operating mode LED.

Carbon battery

Model	11.6	15	17.5
Capacity	11.6 Ah	15 ha	17.5 Ah
Voltage	36v	36v	36v
Weight	3.4 Kg	3.4 Kg	3.5Kg
Electronics	Smart BMS	Smart BMS
Technology	li-on	li-on
Cells	Samsung SDI	panasonic	panasonic
Number of cells	40	40	50
Downloads	size

Latest generation compact lithium-ion battery suitable for installation on city bike or MTB-type frames with key quick release system. Plastic case with carbon effect finish made to resist shocks, with side USB port for recharging various electronic devices, with blue LED residual capacity level indicator. Capacity 11.6 , 15 , and 17.5 Ah at 36 V assembled with Samsung SDI or Panasonic cells to provide the best quality and resistance over time, integrated BMS (Battery Management System) to provide the correct battery charge and discharge cycle, thanks to which it will also be possible to verify the correct use of the battery. Battery charger included from 3 A to 36 V with operating mode LED.

pocket battery

Model	11.6	15
Capacity	11.6 Ah	15 ha
Voltage	36v	36v
Weight	3.4 Kg	3.4 Kg
Electronics	Smart BMS	Smart BMS
Technology	li-on	li-on
Cells	Samsung SDI	panasonic
Number of cells	40	40

Latest generation compact lithium-ion battery suitable for installation on city bike or MTB type frames with quick release system, fastening to the frame with Velcro and quick plug for connection to the engine (with saddle support). Pocket made of water-repellent technical fabric with protective shell and charging cable inserted inside protected by zip. Capacity 11.6 , 15 Ah at 36 V assembled with Samsung SDI or Panasonic cells, Integrated BMS ( Battery Management System ) in order to provide the correct battery charge and discharge cycle, thanks to which it is also possible to verify the correct use of the battery. Battery charger included from 3 A to 36 V with operating mode LED

Slide battery

Model	11.6	15
Capacity	11.6 Ah	15 ha
Voltage	36v	36v
Weight	3.4 Kg	3.4 Kg
Electronics	Smart BMS	Smart BMS
Technology	li-on	li-on
Cells	Samsung SDI	panasonic
Number of cells	40	40
Downloads	size

Latest generation compact lithium-ion battery suitable for installation on city bike or MTB frames, quick release system with key and side release for installation even in the narrowest frames . Shell made of high quality plastic to resist impact, side USB port for downloading data, slide for connection to the frame, base with control unit compartment, blue LED indicator for residual capacity level. This battery can have a capacity of 11.6 Ah or 15 Ah 36 V based on the type of cells used, with Samsung SDI or Panasonic cells, BMS ( Integrated Battery Management System ) to provide the correct battery charge and discharge cycle. Battery charger included from 3 A to 36 V with operating mode LED. Ideal for use in the triangle of the frame which, thanks to the lateral extraction, also allows installation in smaller-sized frames.